How it works
|Pack size||5,000 predatory mites.|
|Presentation||1,000 ml bottle.|
|Carrier||Millet husks, bran and sawdust.|
Directions for use
- Turn and shake bottle gently before use
- Push the centre of the cap to open the dosage hole
- Carefully sprinkle material on leaves
- Make sure the material remains on the leaves for at least a few hours after introduction
- Can also be applied with (Mini)-Air(o)bug
The dosage of Limonica depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction as soon as the first pests are detected in the crop. Introduction rates typically range from 50-250 per m2/release. Releases should be repeated once or twice, or until control is achieved. Consult a Koppert advisor or a recognized distributor of Koppert products for advice on the best strategy for your situation.
Amblydromalus limonicus is most effective at temperatures between 13 and 25°C (55 and 77°F). It is not effective above 30°C (86°F). A. limonicus is sensitive to relative humidity below 70%.
Can be combined with Orius spp. and whitefly parasitoids. Do not combine with other generalist predatory mites (Amblyseius swirskii, Neoseiulus cucumeris, Transeius montdorensis, Amblyseius andersoni).
Application of this product can cause sensitization or allergic reactions, we therefore advise to take the necessary precautions.
Pesticides can have (in)direct effects on biological solutions. Find out which pesticides have side effects on this product.
Storage time after receipt
In the dark, provide ventilation to prevent CO2 accumulation.
"The general conditions of Koppert (Koppert B.V. and/or of its affiliated companies) apply. Only use products that are permitted in your country/state and crop. Always comply with the conditions specified in local product registrations. Koppert cannot be held liable for unauthorized use. Koppert is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions."